Meet your everyday cutting needs with our reliable Workhorse Panel Saws. Available in 3200mm and 3800mm table lengths, featuring electronic rise and fall of the main blade and precise manual tilt for accurate cuts.
Price excludes GST, freight and installation.
Sliding Table length 3200mm and 3800mm
Maximum cut length 3120mm and 3720mm
Main Saw blade 300mm . 350mm option
Scorer blade 120mm
Max. cut height @ 90 100mm
Max. cut height @45 tilt 75mm
Electric rise and fall blade Standard
Weight 3200: 1050kg / 3800: 1120kg
Main motor 5.5kw/ 7.5hp
Scorer .75kw / 1hp
Main blade speeds 4000 / 5000 rpm
The sliding table deliver straight line precision to 0.25mm per 1000mm of travel and run smoothly even under heavy loads.
KDT’s proven carriage design built around thick, multi-chamber Aluminium Extrusions, large dumbbell rollers and hard chromed guide rails.
It’s 430mm wide and anodised for long life scratch free service.
The smooth Panel lock reliably and easily locks the sliding table along multiple points when you are loading your panels – and unlocks with a flick of your thumb.
Your saw carriage must be both heavy and precise.
The complete assembly is mounted directly to the machine frame not suspended from the table and saw shaft electronically balanced.
Large diameter tongue and groove’ tilt guides ensure accuracy. The saw unit rises electrically on large widely spaced Parallel THK guides not a pivot action This is your guarantee of precision.
The slide ways are lubricated via a convenient external pump.
The steel frame is heavily braced to provide a rock solid platform. The side access door is full sized and lever release of belt tension and easy access to the flat poly drive belts make belt changes simple. A door safety switch is fitted and the frame base is raised to allow easy cleaning.
Precise height setting and locking of the Scorer blade is simple thanks to the large direct in line adjustment with fine thread pitch.
There’s unobstructed access to the Scorer and main blades for blade changes and scorer sideways setting.
The 1000 x 650mm cast main table and 430mm wide slide table are complemented with strongly ribbed ‘full size’ rip and outfeed tables to easily support your largest panels.
The outrigger table repositions at the flick of a lever and locks solidly onto the precision ground round guide rail.
The crosscut table support frame is 400mm high with 30mm thick pivots and a large axle the length of the frame.
A triangular frame across the width of the crosscut table fully supports it and is mopunted on the 120mm aluminium sliding rail.
A chrome loading roller eliminates scratching.
The crosscut fence is 90 x80mm and robustly mounted to ensure precise 90 degree cuts.Settings are easy to read from the recessed steel scales.
This is a rock solid and precise system you will appreciate every time you use the saw.
The 3 precision flip over crosscut stops are free of play,easily set with real precision and stay put.
The magnification of the 25mm steel rule is easy to read as it’s slanted towards you.
Twin ‘full sized ‘mitre scales allow you mitre using the crosscut fence very accurately and easily.
A large aluminium rail provide support for large panels.
There’s a supplementary mitre fence for smaller work over 45 degrees.
The cast iron rip fence support slides smoothly along the 50mm diameter hard chrome rail and locks firmly and precisely.
The steel rule is recessed so it won’t get damaged.
If you need to divide large panels you can swing the rip fence under the level of the machine table.
The overhead guard is very easy to position and stays in place thanks to the strong pivot design. Front and rear rollers mean no panels are scratched.
A narrow guard is supplied along with a wide guard for tilt work. These are changed over in moments.
You have a clear view of what’s happening and can
swing the guard clear when trimming a tall cabinet.
Saw blade height setting is powered.The Control panel is recessed to avoid damage with all functions clearly identified, back-lit and simple to use. The tilt scale is large and clear.
A tool kit is supplied in a hard case.
The ‘bum bar ’ allows you to move the sliding table back ‘hands free’.
Versatile too- Wood, plastic, non-ferrous metals – your new KDT is ready for anything’.
Related Products
KS-132K, KS-138K
Experience heavy-duty performance with our full-featured Panel Saws. Available in 3200mm and 3800mm table lengths, equipped with electronic fence positioning and blade height/tilt adjustments, all easily controlled via a user-friendly touch screen interface.
KS-132K
Prima 1600/2500/3200
Discover precision, robustness, simplicity, and affordability with our panel saws. Available in 2500mm and 3200mm table lengths, offering exact manual rise and tilt of the main blade. Choose from single and three-phase options to suit your needs.
MAKE AN ENQUIRY
