Bevel, bevel /flat combination, edge and trim- all in one pass. Fast , easy and great bevel edge panels to deliver today's design trends.
Price excludes GST, freight and installation.
| Feed Speed. | 12 – 20 m/min |
| Panel Thickness | @ 45deg. 9 – 25mm @ 2mm edge. 9-35mm normal |
| Minimum Panel Length. | 150mm |
| Minimum Panel Width. | 135mm |
| Edge Thickness | 0.45 -2mm for angular. 0.45 – 3mm |
| Angle Adjustment Range. | 0-45 degrees |
| Overall Power | 19.88kw |
| Machine Size. | 7400 x 870 x 1610mm |
Your absolute guarantee of precision panel tracking through the Edgebander. Perfect solution for smaller and more slippery panels
Wherever you look you see this
Just a few examples:
The functionality and user friendly format of KDT’s touch screen sets new standards.
ICON Select all functions, the 3 feed track speeds, Up/down of the feed beam, glue temperature setting the machine to ‘standby’ etc!
Pre-program start up and shut down times.
Comprehensive parameter setting function allowing you to adjust settings –e.g. front edge overhang
800mm diameter and supported by a massive 60mm diameter column this will keep even the heaviest tape coils perfectly aligned and rotating smoothly
Infeed guides and feed roller are mounted on twin 10mm steel plates. A pneumatic pressure roller assures the tape is firmly pressed against the feed roller.
Oversized pneumatic guillotine cleanly shears even the heaviest tapes from the roll.
Tape is pressed onto panels on the straight and bevel by twin independent pneuamtic pressure roller groups.
Multiple elements ensure quick and even heating of the glue Automatic ‘standby ‘ lowers the glue temperature to maintain colour and strength.
Independent tanks apply glue to the straight and bevel panel edges – not to the tape : really important >avoids sticky tape trimmings accumulating throughout the feed path.
Tilt angle of the second gluing station is electronically/ digitally set for total accuracy
Chromed infeed plate and 18mm thick infeed fence with accurate digital setting of the premilling allowance.
Pneumatic pin prevents a second panel entering too soon after the first. The timing is varied automatically dependent on what working stations in use.
Electronic ‘line control’ knows exactly the front and back position of the panel on the track – eliminates micro-switches.
Powered feed track height adjustment is coupled to a digital readout.
Two rows of idle rollers are offset – ensuring even your smallest panels are always under firm hold pressure.
Oversize columns at each end support the overhead roller track and ensure alignment without flexing.
Over height panel check system and centralised lube of feed track are included.
The feed track runs on combined square and round guides that eliminate sideways movement or tilt under load. Cast bearing housings and heavy chain feed ensure long life, low maintenance.
External lubrication points along the track for easy maintenance.
The heavy duty twin vertical and bevel trimmers cleanly hog the panel edge to the required bevel angle or bevel/ vertical profile.
On very solid dovetailed tilt guides these are in a separate cabinet to isolate dust created.
High precision digital angular setting displays allow easy angle resetting.
This unit machines out the rebate in the rear of your tapes critical for a perfect ‘fold’. A unique cutter profile delivers the flat/curve groove shape required.
KDT have paid particular attention to their End saw design.
The saws are mounted on a super strong base and both run on the same high precision THK guide for perfect alignment.
Independent 12,000 rpm saw motors ensure clean, effortless trimming
A sensor works with the line control to ensure the saws are in position before the next panel arrives.
Heavy steel construction for the 2 sets of Trimmers guarantee the ultra-fine precision required. Large rotating 180mm copy wheels with 12,000 rpm HF motors ensure the cutters perfectly trim and radius your edges.
KDT’s scrapers use the same cast iron and steel mounts as their trimmers – delivering the precision finish critical to the appearance of your Panels.
Large rotary copy wheels with air jet cleaning deliver a perfect smooth, cutter mark free finish
The radius scrapers are followed by flat scrapers.
Fine thread Digital setting complete these precise scraping units
Final cleaning /polishing and restoration of colour to darker tapes is via large 1440rpm buffs with angle adjustment mounted on 50mm dia. mounts to deliver a vibration free finish.
Pneumatic oscillation is included.
3 separate spray units apply release and cleaning sprays .There are 2 heat guns –to soften the tape prior to folding and assist with colour restoration prior to buffing.
Related Products
KE-2468JH
Maximize productivity with our double-sided edgebander designed for high-volume operations. Achieve twice the output with synchronized edging of two sides in a single pass. Plus, machine adjustments are effortlessly controlled from the user-friendly touchscreen interface.
KHF-530
Reduce your edgebanding labor costs by half with our KDT returns, clever, effective return conveyor from the edgebanding experts at KDT 13-18m/min variable speed.
KE-399
The KE-399 is a versatile machine for both bevel and straight edge banding, featuring quick switching capabilities and high-quality components for reliable performance. It includes functions such as pre-milling, edge tape grooving, end gluing, and fine trimming to ensure a smooth, precise finish.
MAKE AN ENQUIRY
