- 508mm (20”) maximum working width.
- 200mm (8”) maximum working height.
- Driven serrated infeed roller in front of cutterhead.
- Driven smooth outfeed roller behind cutterhead.
- Anti-kick back device at infeed position.
- Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
- Two idle rollers on top of machine to allow easy return of timber to operator.
- Cast iron extensions in front and at rear of work table.
- Handwheel rise and fall of work table through four round threaded columns, driven by chain below work table.
- Rubber sleeves on all four columns to eliminate dust.
- Locking knob to hold table at required height.
- Measurement scale and pointer to set table height.
- Dust extraction chute on rear of machine of 127mm diameter.
- Magnetic push button switch with overload protection.
- Three rollers beneath machine for mobility.
- 5.5HP three phase instead of 3hp single $4268 incl GST
- SPIRAL TCT CUTTERHEAD 3HP Single phase $6,369 incl GST
- SPIRAL TCT CUTTERHEAD MODEL 5,5HP 3 PHASE $6,820 incl GST
*Price includes GST. Freight or installation is excluded.
|Width of work table||510 mm|
|Length of working table||653 mm|
|Maximum depth of cut in one pass||4 mm|
|Minimum length of unbutted workpiece||171 mm|
|Two feed speeds by gear change||4.8 or 6.2 metres/min|
|Cutterhead diameter||80 mm|
|Rotation speed of cutterhead||5000 rpm|
|Cutterhead and feed drive motor||Single Phase 3 hp Three Phase 5 hp|
|Nett weight of machine||430 kgs|
|Spiral cutter head version available||$5290 + GST single phase, $5620 + GST 3 phase|