LEDACRAFT MB-508 THICKNESSER 20 inch (508mm)
- 508mm (20”) maximum working width.
- 200mm (8”) maximum working height.
- Driven serrated infeed roller in front of cutterhead.
- Driven smooth outfeed roller behind cutterhead.
- Anti-kick back device at infeed position.
- Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
- Two idle rollers on top of machine to allow easy return of timber to operator.
- Cast iron extensions in front and at rear of work table.
- Handwheel rise and fall of work table through four round threaded columns, driven by chain below work table.
- Rubber sleeves on all four columns to eliminate dust.
- Locking knob to hold table at required height.
- Measurement scale and pointer to set table height.
- Dust extraction chute on rear of machine of 127mm diameter.
- Magnetic push button switch with overload protection.
- Three rollers beneath machine for mobility.
Width of work table 510 mm
Length of working table 653 mm
Maximum depth of cut in one pass 4 mm
Minimum length of unbutted workpiece 171 mm
Two feed speeds by gear change 4.8 or 6.2 metres/min
Cutterhead diameter 80 mm
Rotation speed of cutterhead 5000 rpm
Cutterhead and feed drive motor Single Phase 3 hp
Nett weight of machine 430 kgs
Single Phase 3 hp or Three Phase 5hp
Now also available with Spiral TCT Cutterhead - Model MB-508S - $4598.00 inc gst