LEDACRAFT MB-380 THICKNESSER 15 inch (381mm)
LEDA MODEL MB-380 POWER FED THICKNESSING PLANER
- 381mm (15”) maximum working width.
- 165mm (6.5”) maximum working height.
- Driven serrated steel infeed roller in front of cutterhead.
- Driven smooth outfeed roller behind cutterhead with rubber surface.
- Anti-kick back device at infeed position.
- Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
- Two support rollers on front of work table and two at rear.
- Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
- Locking knob to hold table at required height.
- Measurement scale and pointer to set table height.
- Dust extraction chute on rear of machine of 100mm diameter.
- Push button switch with protruding stop button.
Width of work table 381 mm
Length of working table 653 mm
Maximum depth of cut in one pass 3 mm
Minimum length of unbutted workpiece 170 mm
Two feed speeds by gear change 5 or 9 metres/min
Cutterhead diameter 75 mm
Rotation speed of cutterhead 5000 rpm
Cutterhead and feed drive motor Single Phase 3hp
Nett weight of machine 210 kgs
Optional: Now also available with Spiral TCT Cutterhead - Model MB-380S 1ph - $3278.00 inc gst